1. Repositorio Institucional Universidad de Antioquia
  2. Investigaciones
  3. CIFO (Centro de Investigaciones de la Facultad de Odontología)
  4. Artículos de Revista en Odontología
Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/10495/38778
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.authorVásquez Gómez, Mónica Lena-
dc.contributor.authorCálao Flórez, Eliana María-
dc.contributor.authorBecerra Santos, Fabio-
dc.contributor.authorOssa S., Jorge-
dc.contributor.authorEnríquez G., Carlos-
dc.contributor.authorFresneda B., Eliseo-
dc.date.accessioned2024-03-26T23:46:22Z-
dc.date.available2024-03-26T23:46:22Z-
dc.date.issued2001-
dc.identifier.citationVásquez M, Calao E, Becerra F, Ossa J, Enríquez C, Fresneda E. Initial stress differences between sliding and sectional mechanics with an endosseous implant as anchorage: a 3-dimensional finite element analysis. Angle Orthod. 2001 Aug;71(4):247-56. doi: 10.1043/0003-3219(2001)071<0247:ISDBSA>2.0.CO;2.spa
dc.identifier.issn0003-3219-
dc.identifier.urihttps://hdl.handle.net/10495/38778-
dc.description.abstractABSTRACT: Endosseous implants have been used as orthodontic anchorage in recent years. A 3-dimensional mathematical model was constructed that uses the finite element method, which simulated an endosseous implant and an upper canine with its periodontal ligament and cortical and cancellous bone. Levels of initial stress were measured during 2 types of canine retraction mechanics (friction and frictionless). The lower magnitude and more uniform stresses in the implant and its cortical bone were found to have a moment-force ratio (M/F) of 6.1:1, whereas the canine and its supporting structures exerted a M/F ratio of 10.3:1. On the basis of these results, when the anchor unit is an endosseous implant, it seems better to use a precalibrated retraction system without friction (T-loop) where a low load-deflection curve would be generated. (Angle Orthod 2001;71:247–256.)spa
dc.format.extent10 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherEdward H. Angle Society of Orthodontiaspa
dc.type.hasversioninfo:eu-repo/semantics/publishedVersionspa
dc.rightsinfo:eu-repo/semantics/openAccessspa
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/2.5/co/*
dc.titleInitial Stress Differences Between Sliding and Sectional Mechanics with an Endosseous Implant as Anchorage: A 3-Dimensional Finite Element Analysisspa
dc.typeinfo:eu-repo/semantics/articlespa
dc.publisher.groupGrupo de Investigación en Patología Oral Periodoncia y Cirugía Alvéolo-Dentaria (POPCAD)spa
dc.identifier.doi10.1043/0003-3219(2001)071<0247:ISDBSA>2.0.CO;2-
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.rights.accessrightshttp://purl.org/coar/access_right/c_abf2spa
dc.identifier.eissn1945-7103-
oaire.citationtitleAngle Orthodontistspa
oaire.citationstartpage247spa
oaire.citationendpage256spa
oaire.citationvolume71spa
oaire.citationissue4spa
dc.rights.creativecommonshttps://creativecommons.org/licenses/by-nc-nd/4.0/spa
oaire.fundernameUniversidad de Antioquia. Vicerrectoría de investigación. Comité para el Desarrollo de la Investigación - CODIspa
dc.publisher.placeAppleton, Estados Unidosspa
dc.type.coarhttp://purl.org/coar/resource_type/c_2df8fbb1spa
dc.type.redcolhttps://purl.org/redcol/resource_type/ARTspa
dc.type.localArtículo de investigaciónspa
dc.subject.decsProceso Alveolar - fisiología-
dc.subject.decsAlveolar Process - physiology-
dc.subject.decsSimulación por Computador-
dc.subject.decsComputer Simulation-
dc.subject.decsDiente Canino - fisiología-
dc.subject.decsCuspid - physiology-
dc.subject.decsImplantación Dental Endoósea-
dc.subject.decsDental Implantation, Endosseous-
dc.subject.decsImplantes Dentales-
dc.subject.decsDental Implants-
dc.subject.decsAnálisis del Estrés Dental - métodos-
dc.subject.decsDental Stress Analysis - methods-
dc.subject.decsAnálisis de Elementos Finitos-
dc.subject.decsFinite Element Analysis-
dc.subject.decsDiseño de Aparato Ortodóncico-
dc.subject.decsOrthodontic Appliance Design-
dc.subject.decsEstrés Mecánico-
dc.subject.decsStress, Mechanical-
dc.subject.decsTécnicas de Movimiento Dental-
dc.subject.decsTooth Movement Techniques-
dc.description.researchgroupidCOL0010074spa
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D000539-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D003198-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D003481-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D003758-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D015921-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D003799-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D020342-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D016382-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D013314-
dc.subject.meshurihttps://id.nlm.nih.gov/mesh/D014087-
dc.relation.ispartofjournalabbrevAngle Orthod.spa
oaire.funderidentifier.rorRoR:03bp5hc83-
Aparece en las colecciones: Artículos de Revista en Odontología

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
BecerraFabio_2001_Initial_Stress_Differences.pdfArtículo de investigación1.98 MBAdobe PDFVisualizar/Abrir
Mostrar el registro sencillo del ítem


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons