Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/10495/39525
Título : Quality of red tilapia viscera oil (Oreochromis sp.) as a function of extraction methods
Autor : Arias Cardona, Lorena
Márquez Fernández, Diana Margarita
Zapata Montoya, José Edgar
metadata.dc.subject.*: Aceites de Pescado
Fish Oils
Ácidos Grasos
Fatty Acids
Rastreo Diferencial de Calorimetría
Calorimetry, Differential Scanning
Tilapia
Vísceras
Viscera
https://id.nlm.nih.gov/mesh/D005395
https://id.nlm.nih.gov/mesh/D005227
https://id.nlm.nih.gov/mesh/D002152
https://id.nlm.nih.gov/mesh/D017210
https://id.nlm.nih.gov/mesh/D014781
Fecha de publicación : 2022
Editorial : Elsevier
Resumen : ABSTRACT: This study aimed to propose a simple and efficient heating-freezing method for oil recovery from red tilapia (Oreochromis sp.) viscera, suitable for industrial application and that does not affect its composition. Three methodologies for oil extraction were studied: a) direct heating (69 C and 29 min) of samples followed by separation of the oil by decantation, b) direct heating with subsequent freezing and c) solvent extraction assisted by ultrasound. For the oil obtained by each methodology, the following factors were determined: peroxide and iodine values, oxidative stability index, yield percentages and fatty acid profile and, to evaluate the changes thereof, a thermal analysis by differential scanning calorimetry was performed. An oil extracted by centrifugation from fresh viscera was used as control. Results showed yields of 92,126%, 60,99% and 55,36% for the oil obtained by heating and freezing, heating and decanting and solvent extraction, respectively, the other evaluated parameters were similar among each other. The content of PUFA was not affected by heating when compared to the control oil, although a decrease was observed in the solvent extracted oil. This behavior was corroborated with the thermal analysis, which showed that the higher PUFA content, the lower the melting temperatures of the oils and the energy required for phase change. A principal component analysis allowed determining that while there are no differences in the abundance of fatty acids C20:1, 14:0, 18:0, 16:1 and C16:0, there are differences for fatty acids C18:1 and C18:2 depending on the method of extraction used in the oil obtention. The results of this study show that the heating-freezing extraction method is a good alternative for acquiring value-added products and facilitates their implementation in rural areas. Furthermore, allows obtaining a product with high content of polyunsaturated fatty acids (at least a third of the total content).
metadata.dc.identifier.eissn: 2405-8440
metadata.dc.identifier.doi: 10.1016/j.heliyon.2022.e09546
Aparece en las colecciones: Artículos de Revista en Farmacéutica y Alimentarias

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
ZapataJosé_2022_Quality_Red_Tilapia_Viscera_Oil.pdfArtículo de investigación694.01 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons