Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/10495/30852
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.authorLópez Osorio, Betty Lucy-
dc.contributor.authorPérez Pérez, León Dario-
dc.contributor.authorMesa Cadavid, Mónica-
dc.contributor.authorSierra García, Ligia-
dc.contributor.authorDevaux, Eric-
dc.contributor.authorCamargo, Mauricio-
dc.contributor.authorCampagne, Christine-
dc.contributor.authorGiraud, Stéphane-
dc.date.accessioned2022-09-25T12:58:53Z-
dc.date.available2022-09-25T12:58:53Z-
dc.date.issued2005-
dc.identifier.citationLópez, B., Pérez, L., Mesa, M., Sierra, L., Devaux, E., Camargo, M., Campagne, C. & Giraud, S. (2005). Use of mesoporous silica as a reinforcing agent in rubber compounds. e-Polymers, 5(1), 018. https://doi.org/10.1515/epoly.2005.5.1.182spa
dc.identifier.issn1618-7229-
dc.identifier.urihttps://hdl.handle.net/10495/30852-
dc.description.abstractABSTRACT: esoporous silica is used as filler for styrene-butadiene rubber (SBR); filler-polymer interactions are compared with those exhibited when Ultrasil silica (VN3) is used. A silane coupling agent is added to improve filler dispersion and its influence on the bound-rubber formation is also investigated. The bound-rubber content is higher for the mesoporous silica and increases further for the sample containing silane. The increase is explained by chemical interactions between filler and rubber and penetration of the rubber chains into the mesopores. This is confirmed by 13C solid-state NMR, IR spectroscopy and differential scanning calorimetry. Dynamic mechanical thermal analysis shows higher storage modulus for the rubber filled with mesoporous silica.spa
dc.format.extent13spa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherDe Gruyter Openspa
dc.type.hasversioninfo:eu-repo/semantics/publishedVersionspa
dc.rightsinfo:eu-repo/semantics/openAccessspa
dc.rights.urihttp://creativecommons.org/licenses/by/2.5/co/*
dc.titleUse of mesoporous silica as a reinforcing agent in rubber compoundsspa
dc.typeinfo:eu-repo/semantics/articlespa
dc.publisher.groupCiencia de los Materialesspa
dc.identifier.doi10.1515/epoly.2005.5.1.182-
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.rights.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.citationtitleE-Polymersspa
oaire.citationstartpage1spa
oaire.citationendpage13spa
oaire.citationissue18spa
dc.rights.creativecommonshttps://creativecommons.org/licenses/by/4.0/spa
dc.publisher.placeFranciaspa
dc.type.coarhttp://purl.org/coar/resource_type/c_2df8fbb1spa
dc.type.redcolhttps://purl.org/redcol/resource_type/ARTspa
dc.type.localArtículo de investigaciónspa
dc.subject.lembSílice-
dc.subject.lembSilica-
dc.subject.lembCaucho-
dc.subject.lembRubber-
dc.subject.lembPolímeros-
dc.subject.lembPolymers-
dc.subject.proposalSílice mesoporosaspa
dc.description.researchgroupidCOL0002401spa
Aparece en las colecciones: Artículos de Revista en Ciencias Exactas y Naturales

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
LopezBetty_2005_UseMesoporousSilica.pdfArtículo de investigación720.05 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons