Por favor, use este identificador para citar o enlazar este ítem:
https://hdl.handle.net/10495/44147
Título : | Effect of ammoniacal thiosulfate solution composition on the gold dissolution rate: An electrochemical study |
Autor : | Calderón Gutiérrez, Jorge Andrés Ramírez Sánchez, Carolina Tamayo Sepúlveda, José Adrián |
metadata.dc.subject.*: | Amoníaco Ammonia Análisis electroquímico Electrochemical analysis Lixiviación Leaching Ingeniería química Chemical engineering Procesos químicos Chemical processes Reacciones químicas Chemical reactions Electrolitos Electrolytes Electrodisolución de oro Reducción de oxígeno |
Fecha de publicación : | 2025 |
Editorial : | Elsevier International Society of Electrochemistry (ISE) |
Citación : | José A. Tamayo, Carolina Ramírez-Sanchez, Jorge A. Calderon. Effect of ammoniacal thiosulfate solution composition on the gold dissolution rate: An electrochemical study. Electrochimica Acta 510 (2025) 145359 https://doi.org/10.1016/j.electacta.2024.145359 |
Resumen : | ABSTRACT: The electrochemical behavior of ammoniacal thiosulfate solutions (S2O3 2-- NH3-Cu2+ -EDTA) has been studied for varying electrolyte compositions in the gold electro-dissolution. A gold rotating disk electrode (RDE) was employed to measure anodic and cathodic polarization curves in alkaline thiosulfate solutions. Potentiodynamic polarization showed how thiosulfate, ammonia, and copper concentration influence the cathodic and anodic behavior of the electrolyte. Likewise, the influence of oxygen on the electrochemical behavior system was evi denced from the analysis of polarization curves, and using Koutecky – Levich equation (slope of 59.60 mV/ decade), it was possible to determine the peroxide pathway for oxygen reduction reaction (ORR) with twoelectron transference. Additionally, gold dissolution and thiosulfate degradation were evaluated using the gold foil leaching tests. It was found solutions with a 0.2 mol l -1 thiosulfate concentration favored the dissolution of gold and by maintaining an adequate ratio between thiosulfate/ammonium (1:3) or thiosulfate/copper (4:1) enable the attainment high gold dissolution and lower degradation of thiosulfate. |
ISSN : | 0013-4686 |
metadata.dc.identifier.doi: | 10.1016/j.electacta.2024.145359 |
Aparece en las colecciones: | Artículos de Revista en Ingeniería |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
TamayoJose_2025_Amoniacal_Composition_Electrochemical.pdf | Artículo de investigación | 3.55 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons