Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/10495/34763
Título : Development of low content Ti-x%wt. Mg alloys by mechanical milling plus hot isostatic pressing
Autor : Restrepo Carvajal, Alex Humberto
Ríos Arbeláez, Jesús María
Zuleta, Alejandro Alberto
Bolívar Osorio, Francisco Javier
Castaño González, Juan Guillermo
Correa, Esteban
Echeverría Echeverría, Félix
Lambrecht, Mickaël
Lasanta, María Isabel
Pérez Trujillo, Francisco Javier
metadata.dc.subject.*: Microestructura
Microstructure
Titanio
Titanium
Magnesio
Magnesium
Metalurgia de polvos
Powder metallurgy
Fecha de publicación : 2023
Editorial : Springer
Citación : Carvajal, A.H.R., Ríos, J.M., Zuleta, A.A. et al. Development of low content Ti-x%wt. Mg alloys by mechanical milling plus hot isostatic pressing. Int J Adv Manuf Technol 126, 1733–1746 (2023). https://doi.org/10.1007/s00170-023-11126-5
Resumen : ABSTRACT: Several authors have shown promising results using Ti and Mg to develop materials that combine the benefits of these two metals, such as their low density and absence of harmful second phases, which makes them attractive for aerospace and biomedical applications as well as for hydrogen storage. However, titanium and magnesium are almost immiscible and there are great differences in processing temperatures of these two metals. Within the techniques reported in the literature for obtaining Ti-Mg alloys, powder metallurgy and high-energy ball milling are possibly the most popular. In this work, Ti and Mg powders were mixed using a high-energy ball mill and subsequently these mixes were sintered by hot isostatic pressing (HIP), under various conditions, to obtain Ti-Mg alloys with Mg %wt. close to the limit of solubility (x < 2%wt.). The results showed the influence of the sintering parameters in the microstructure of the sintered material, which allowed us to obtain a Ti-Mg alloy instead of a composite material.
metadata.dc.identifier.eissn: 1433-3015
ISSN : 0268-3768
metadata.dc.identifier.doi: 10.1007/s00170-023-11126-5
Aparece en las colecciones: Artículos de Revista en Ingeniería

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
RestrepoAlex2023_Development_Low_Content.pdfArtículo de investigación6.55 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons