Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/10495/5763
Título : Activación de carbón mineral mediante proceso físico en horno tubular horizontal y atmósfera inerte
Autor : López Gómez, María Esperanza
González Hernández, Andrés Giovanni
metadata.dc.subject.*: Carbón mineral
Atmósfera inerte
Carbón activado
Activación térmica
Carbonización
Adsorción
Fecha de publicación : 2013
Editorial : Universidad de Antioquia, Facultad de Ingeniería
Citación : L. M. Uribe, M. E. López and A. G. González, “Activación de carbón mineral mediante proceso físico en horno tubular horizontal y atmósfera inerte”, Revista Colombiana de Materiales, no. 3, pp. 25-40, 2013.
Resumen : RESUMEN: Este estudio se realizó con la intención de otorgar valor agregado a un carbón mineral tipo ripio (diámetro de abertura del tamiz 9.5 mm), de bajo precio en el mercado, procedente del Suroeste de Antioquia. Se pretendió determinar a nivel de laboratorio condiciones favorables para lograr la activación de las partículas de carbón, mediante un proceso térmico y vapor de agua. Las muestras se sometieron a diferentes condiciones: tiempo de carbonización (60 y 90 min) y temperatura de activación (800, 900 y 950 °C), para posteriormente analizar y comparar las características físicas, térmicas y texturales desarrolladas, en relación a los rangos de los carbones activados comerciales. Mediante las técnicas de caracterización empleadas: adsorción de soluciones, isotermas de adsorción de nitrógeno (modelo BET), análisis termogravimétricos y diferencial (TGA y DTA), entre otras, se logró observar que las condiciones tiempo de carbonización y temperatura de activación resultaron ser favorables para la obtención de carbón activado, siendo más influyente la temperatura, dado que a medida que ésta aumentó las características mejoraron.
ABSTRACT: This study was intended for increasing the added value of the mineral coal type ripio extracted from the Southwest region of Antioquia, due to its low price on the market. One of the objectives was to determinate at laboratory scale a favorable condition for obtaining the activation of coal particles, trough thermal process with steam water. The samples were immersed into different conditions: carbonization time (60 and 90 min) and activation temperatures (800, 900 and 950 °C), with the objective of analyze and compare physic, thermal, and textural characteristics that this samples developed, under this conditions. Characterization techniques like solution adsorption, isothermal nitrogen adsorption (model BET), thermogravimetrics and differential analysis (TGA and DTA), and others helped to know that the most influential variable was the temperature, because when it was increased, the final product characteristics were improved.
ISSN : 2256-1013
Aparece en las colecciones: Artículos de Revista en Ingeniería

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UribeLina_2013_activacioncarbonmineral.pdfArtículo de investigación623.18 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons